92F Proline Prosonic Flow 92F ultrasonic flowmeter

Field of application

Prosonic Flow F is the inline sensor with rugged industrial design for Ultrasonic fluid measurement. Combined with the loop-powered Prosonic Flow 92 transmitter, the device offers easy system integration and accuracy at an attractive price. Prosonic Flow 92F is ideally suited for the chemical and petrochemical industries.

• The measuring principle is independent of pressure, density, temperature, conductivity and viscosity

• Inline device for homogeneous conductive and non-conductive liquids in the chemical and petrochemical industry

Device properties:

• Full compliance according to NACE MR0175 and MR0103

• Nominal diameter: DN 25 to 300 (1 to 12")

• Medium temperature: –40 to 200 °C (–40 to 392 °F)

• Device as compact or remote version

• 2-line backlit display with push buttons

• HART, PROFIBUS PA, FOUNDATION Fieldbus

Benefits

• Safe design for process industries – international hazardous area approvals

• No additional pressure loss – full-bore design

• Process transparency – diagnostic capability

• Easy installation and reduced installation costs – loop-powered transmitter

• Fully industry compliant – IEC/ATEX/FM/CSA/JPN/NEPSI

• Automatic recovery of data for servicing

• Measuring principle

  Ultrasonic flow

• Product headline

  Higly accurate, loop-powered flowmeter with innovative parallel path design for minimum inlet runs.
  Inline device for homogeneous conductive and non-conductive liquids in the chemical and petrochemical industry.

• Sensor features

  Safe design for process industries – international hazardous area approvals. No additional pressure loss – full-bore design. Process transparency – diagnostic capability.
  Full compliance according to NACE MR0175 and MR010. Nominal diameter: DN 25 to 300 (1 to 12"). Medium temperature: –40 to 200 °C (–40 to 392 °F).

• Transmitter features

  Easy installation and reduced installation costs – loop-powered transmitter. Fully industry compliant – IEC/ATEX/FM/CSA/JPN/NEPSI. Automatic recovery of data for servicing.
  Device as compact or remote version. 2-line backlit display with push buttons. HART, PROFIBUS PA, FOUNDATION Fieldbus.

• Nominal diameter range

  2 path version: DN80 to 300 (3 to12")
  3 path version: DN25 to 50 (1 to 2")
  4 path version: DN 80 to 300 (3 to 12")

• Wetted materials

  Sensor:
  A351-CF3M (DN25 to 100)
  1.4404/TP316/TP316L or A106 GrB (DN150 to 300)
  Transducer: 1.4404/316/316L
  Flanges : 1.4404/316/316L or A105/1.0432

• Measured variables

  Volume flow, calculated mass flow, sound velocity, flow velocity, signal strength

• Max. measurement error

  Volume flow (standard):
  - ±0.5 % o.r. for 0.5 to 10 m/s (1.6 to 33 ft/s)
  Volume flow (option):
  - ±0.3 % o.r. for 0.5 to 10 m/s (1.6 to 33 ft/s)

• Measuring range

  0.5 to 10 m/s (1.6 to 33 ft/s)

• Max. process pressure

  PN 40 / ASME Cl. 300 / JIS 20K

• Medium temperature range

  -40 to +150 °C (-40 to +302 °F)
  -40 to +200 °C (-40 to +392 °F) optional

• Ambient temperature range

  -40 to +60 °C (-40 to +140 °F) compact
  -40 to +80 °C (-40 to +176 °F) remote sensor
  -40 to +60 °C (-40 to +140 °F) remote transmitter

• Transmitter housing material

  AlSi10Mg, coated

• Degree of protection

  IP67, type 4X enclosure
  IP68 type 6P enclosure (option for remote)

• Display/Operation

  2 lines backlit display with 3 push buttons

• Outputs

  1x 4-20 mA HART
  1x Pulse/frequency/switch output (passive)

• Inputs

  N/A

• Digital communication

  HART, Profibus PA, FOUNDATION Fieldbus

• Power supply

  2 wire loop powered

• Hazardous area approvals

  ATEX,FM, CSA, JPNm UK Ex

• Other approvals and certificates

  3.1 material (wetted parts), calibration performed on accredited
  calibration facilities (acc. to ISO/IEC 17025), CRN, AD2000
  PED, EAC marking

• Product safety

  EAC marking

• Metrological approvals and certificates

  calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)

• Pressure approvals and certificates

  CRN, PED, AD2000

• Material certificates

  3.1 material (wetted parts)