8O1B Proline Promass O 100 Coriolis flowmeter

Field of application

Promass O is designed for premium accuracy of liquids and gases at the highest process pressures in the oil and gas industry. The sensor is fully suitable for offshore conditions and resistant to stress corrosion cracking. Promass O 100 delivers full performance on the smallest footprint with its ultra-compact transmitter and thus enables seamless system integration. Heartbeat Technology ensures process safety at all times.

• Measuring principle operates independently of physical fluid properties such as viscosity or density

• For premium accuracy at highest process pressures, fully suitable for offshore conditions

Device properties

• Measuring tube in 25Cr Duplex, 1.4410 (UNS S32750)

• Process pressure up to PN 250 (Class 1500)

• Nominal diameter: DN 80 to 150 (3 to 6")

• Robust, ultra-compact transmitter housing

• High ingress protection: IP69K

• Local display available

Benefits

• Maximum safety – highest resistance to stress corrosion cracking

• Fewer process measuring points – multivariable measurement (flow, density, temperature)

• Space-saving installation – no in/outlet run needs

• Space-saving transmitter – full functionality on the smallest footprint

• Time-saving local operation without additional software and hardware – integrated web server

• Integrated verification – Heartbeat Technology

• Measuring principle

  Coriolis

• Product headline

  Robust high-pressure flowmeter with an ultra-compact transmitter.
  For premium accuracy at highest process pressures, fully suitable for offshore conditions.

• Sensor features

  Maximum safety – highest resistance to stress corrosion cracking. Fewer process measuring points – multivariable measurement (flow, density, temperature). Space‐saving installation – no in-/outlet run needs.
  Measuring tube in 25Cr Duplex, 1.4410 (UNS S32750). Process pressure up to PN 250 (Class 1500). Nominal diameter: DN 80 to 150 (3 to 6").

• Transmitter features

  Space‐saving transmitter – full functionality on the smallest footprint. Time‐saving local operation without additional software and hardware – integrated web server.
  Robust, ultra-compact transmitter housing. Highest degree of protection: IP69. Local display available.

• Nominal diameter range

  DN 80 to 150 (3 to 6")

• Wetted materials

  Measuring tube: 25Cr duplex (Super Duplex), 1.4410 (UNS S32750)
  Connection: 25Cr duplex (Super Duplex), 1.4410 (F53)

• Measured variables

  Mass flow, density, temperature, volume flow, corrected volume flow (API tables), reference density, concentration

• Max. measurement error

  Mass flow (liquid): ±0.1 (standard), 0.05 % (option)
  Volume flow (liquid): ±0.1 %
  Mass flow (gas): ±0.35 %
  Density (liquid): ±0.0005 g/cm³

• Measuring range

  0 to 800 000 kg/h (0 to 29 400 lb/min)

• Max. process pressure

  PN 250, Class 1500

• Medium temperature range

  –40 to +205 °C (–40 to +401 °F)

• Ambient temperature range

  Standard: –40 to +60 °C (–40 to +140 °F)
  Option: –50 to +60 °C (–58 to +140 °F)

• Sensor housing material

  1.4404 (316L), highest corrosion resistance

• Transmitter housing material

  Compact: AlSi10Mg, coated
  Compact/ultra‐compact: 1.4404 (316L)

• Degree of protection

  Standard: IP66/67, type 4X enclosure
  Option: IP69

• Display/Operation

  4‐line backlit display available (no local operation)
  Configuration via web browser and operating tools possible

• Outputs

  4‐20 mA HART (active)
  Pulse/frequency/switch output (passive)

• Inputs

  None

• Digital communication

  HART, Modbus RS485, EtherNet/IP, PROFIBUS DP, PROFINET

• Power supply

  DC 20 to 30 V

• Hazardous area approvals

  ATEX, IECEx, cCSAus, INMETRO, NEPSI, EAC

• Product safety

  CE, C-Tick, EAC marking

• Metrological approvals and certificates

  Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025),
  Heartbeat Technology complies with the requirements for measurement traceability according to ISO 9001:2015 – Section 7.1.5.2 a (TÜV SÜD attestation)

• Marine approvals and certificates

  LR approval, DNV GL approval, ABS approval, BV approval, CCS approval

• Pressure approvals and certificates

  PED, CRN, AD 2000

• Material certificates

  3.1 material
  NACE MR0175/MR0103, PMI; welding test acc. to EN ISO, ASME, NORSOK